Leopard Damascus Steel
Shape : flat
Pattern : wild
Recycled steel from the barrel of a German Leopard tank is forged by Markus Balbach into a fine 320-layer Damascus steel.
watch it - in a video :
- Details (Sizes)
- This non-stainless Damascus steel consists of steel from the cannon barrel of a Leopard-I tank in combination with a tool steel, to form a total of 320 layers.
- The plate is annealed, ground flat, and is slightly etched before shipment.
- With proper heat treatment, the hardness of this steel is about 63HRC, and is thus harder than glass. Hardening is done in a vacuum or with inert gas at 850 degrees, with a retention time of up to 5 minutes.
- The cooling rate is equivalent to that of an oil hardening. For the conversion of retained austenite, either a freezing process at 90 °C or a tempering process at 140 °C takes place. Next, a tempering process at 150 °C should be carried out to assure the complete transformation of retained austenite to martensite.
Dimensions: 350mm x 50mm x 2.5mm
( length / width / height )